Rockwell Automation MagneMotion QuickStick HT User Manual

Specifications and Site Requirements
Electrical Specifications
QuickStick HT User Manual 139
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Motor/QSHT 5700 Inverter Drive Cable
The QuickStick HT 5700 inverter is supplied with appropriate motor (stator) drive cables,
which provide power to the phases of the motor. These cables are available in lengths from
2 m to 30 m. Contact MagneMotion for replacement cables. The motor drive cable connects
directly to the QSHT 5700 inverter and to the related motor.
Figure 4-13: 1 m QSHT 5700 Inverter to Stator Drive Cable
Table 4-9: 1 m QSHT 5700 Inverter to Stator Drive Cable Pinouts
Wire
Gauge Inverter Motor
Stator Block 1, Phase A 16 AWG U-A A
Stator Block 1, Phase B 16 AWG V-A B
Stator Block 1, Phase C 16 AWG W-A C
Stator Block 2, Phase A 16 AWG U-B D
Stator Block 2, Phase B 16 AWG V-B E
Stator Block 2, Phase C 16 AWG W-B F
Gnd 16 AWG PE G
Shield BRAID Exposed Braid Shell
NOTICE Modifications to the MMI motor to inverter cables, or using
custom cables, violates the UL conditions of acceptability.
Motor
Inverter
MMI-HT-CBP10-xx
G
A
B
CD
E
F
A

Rockwell Automation MagneMotion QuickStick HT Specifications

General

Brand	Rockwell Automation
Model	MagneMotion QuickStick HT
Category	Accessories
Language	English