Safety Guidelines
Safety Considerations
QuickStick HT User Manual 45
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
• Use of the QSHT components for any purpose other than as a linear transport system
is not recommended and can damage the QSHT components or the equipment where
they are installed.
• Always operate the QSHT transport system with appropriate barriers in place to help
prevent contact with moving objects by personnel.
• Do not install or operate the QSHT transport system if any of the components have
been dropped, damaged, or are malfunctioning.
• Keep cables and connectors away from heated surfaces.
• Do not modify the connectors or ports.
QSHT Transport System Hazard Locations
Figure 2-1: Locations of Hazardous Points on the QuickStick HT Transport System
Guideway (typical, user-defined)
Mechanical Hazard - Pinch Point
Vehicle (typical, user-defined)
Mechanical Hazard - Pinch Point
Magnetic Field Hazard
Switch (typical, user-defined)
Mechanical Hazard - Pinch Point
To Next Page
Loading...
Need help?
General
