Rockwell Automation MagneMotion QuickStick HT User Manual

Specifications and Site Requirements
Communications
QuickStick HT User Manual 171
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Figure 4-22: RS-422 Cables
Motor Drive to Motor Drive
An RS-422 daisy chain cable is used to connect the downstream end of the QSMC motor con-
troller for one motor to the upstream end of the QSMC motor controller for the next motor in
the path. This cable is a standard pin-to-pin straight through cable with a 4-pin female M8
connector on one end and a 4-pin female M8 connector on the other end. One female M8 con-
nector plugs into the downstream communication port on the motor drive and the other M8
connector plugs into the upstream communication port on the next motor drive.
Table 4-51: RS-422 Cable Pinouts
M8 Nano-Mizer
®
,
4-Pin, Female
DE-9, Male DE-9, Female
M8 Nano-Mizer,
4-Pin, Female
End ‘A’ End ‘B’
RxD+ 1 TxD+ 373
RxD- 2 TxD- 824
TxD+ 3 RxD+ 731
TxD- 4 RxD- 282
DE-9M
DE-9F
Nano-Mizer FNano-Mizer F
Nano-Mizer F
Nano-Mizer F
End ‘A’
End ‘B’
(Motor)
(Node Controller)
50 m Max
1
2
3
4
23
7
8
7
8
2
3
1
2
3
4

Rockwell Automation MagneMotion QuickStick HT Specifications

General

Brand	Rockwell Automation
Model	MagneMotion QuickStick HT
Category	Accessories
Language	English