Safety Guidelines
Regulatory Compliance
40 MagneMotion
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Regulatory Compliance
The QuickStick HT components are CE-compliant. To determine if a spe-
cific component is CE-compliant, check for the CE marking on the compo-
nent. If necessary, the official Declaration of Conformity (DoC),
2198-ct002, can be downloaded from the Rockwell Automation Literature
Library.
The QuickStick HT components are UL Recognized in Canada and the
United States. To determine if a specific component is UL Recognized,
check for the UL Recognized Mark on the component. Some examples of
the Mark may not display the ‘C’ and ‘US’.
Other sections of this manual may include additional regulatory information. These compo-
nents comply with the regulations from the organizations that are indicated in Table 2-1.
EU RoHS and EU WEEE Compliance
MagneMotion
®
products are considered parts of a large-scale fixed installation and as a
large-scale stationary industrial tool for purposes of the European Union RoHS and WEEE
Directives and are therefore exempt from mandatory compliance. The CE Marking on the
DoC excludes reference to the RoHS Directive for that reason.
However, MagneMotion has taken voluntary steps to make sure that its products comply with
the requirements of EU RoHS and WEEE.
Table 2-1: Regulatory Information
Organization Regulations
CE (Conformité Européenne) – The European
safety requirements
• Machinery Directive
• Low Voltage Directive
• EMC Directive
UL • 61010-1
NOTICE It is the responsibility of the end user/third party integrator to
make sure that the installed QuickStick HT transport system
complies with the appropriate facility, local, and national
regulations.
To Next Page
Loading...
Need help?
General
