Introduction
Transport System Software Overview
QuickStick HT User Manual 35
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Transport System Software Overview
Several software applications are used to configure, test, and administer a QuickStick HT
transport system as shown in Figure 1-3 and described after the figure. See Related Documen-
tation on page 27 for the reference manuals for these applications.
Figure 1-3: Simplified View of Transport System Software Relationships
• NC Web Interface – A web-based software application that is supplied by MagneMo-
tion and resident on the node controllers, for administration of the transport system
components.
• NC Console Interface – A serial communication software application that is supplied
by MagneMotion and resident on the node controllers, for administration of the node
controller.
• NCHost TCP Interface Utility – A Windows
®
software application that is supplied
by MagneMotion to move vehicles for test or demonstration purposes. This applica-
tion supports system testing without the host controller to verify that vehicles move
correctly before integrating a transport system into a production environment.
• QuickStick Configurator Utility (Configurator) – A Windows software application
that is supplied by MagneMotion to create or change the Node Controller Configura-
tion File.
Host Controller
(EtherNet/IP or TCP/IP)
MagneMotion Configurator
NC Web Interface
NCHost TCP Interface Utility
Node Controller Software Image
(controller_image)
Motor ERF Image Files
(motor_image.erf)
Motor Type Files
(motor_type.xml)
Magnet Array Type Files
(magnet_array_type.xml)
Node Controller Configuration File
(node_configuration.xml)
Motor Info and Config Service
(MICS_motor_data.xml)
(NCHost.exe)
(MMConfigTool.exe)
Virtual Scope Utility
NC Console Interface
(MMI_Virtual_Scope.exe)
(TCP/IP)
(RS-232)
Node Controller
Motor Drives
Motors
Node Controller
Administration
System Control
System Testing
Performance
Monitoring
Node Controller
Administration
node_configuration.xml
track_file.mmtrk
demo_script.txt