Maintenance
Shipping
310 MagneMotion
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Shipping
If a QuickStick HT component must be shipped, either for return to MagneMotion or to
another location, it must be packaged properly to make sure it arrives undamaged. The follow-
ing procedure provides the correct method for handling and packaging QSHT components for
shipment.
Required Tools and Equipment
• Metric hex wrenches.
• English hex wrenches.
• Open-end wrench, adjustable.
• Fork truck or appropriate lift as required.
SHOCK HAZARD: Before beginning this procedure, the
QuickStick HT transport system must be shut down follow-
ing the procedure that is provided in Shut-down on page 261.
LIFTING HAZARD: The QuickStick HT motors can
weigh as much as 41.5 kg [91.5 lb]. Failure to take the proper
precautions before moving them could result in personal
injury.
Use proper techniques for lifting and safety toe shoes when
moving any QuickStick HT components.
To Next Page
Loading...
Need help?
General
