Suzuki drz 400 2007 User Manual

3-54 ENGINE
GEARSHIFT SHAFT
• Tighten the gearshift arm stopper to the specified lorque.
~ Gearshift arm stopper : 19 N·m (1 .9 kgf -m, 1 3. 5 Ib- ft )
OIL PUMP
• Before mounling the oil pump, apply engine oil to the Sliding
surfaces of Ihe oil pump case, outer rolor, inner rotor, and
shaft.
• When installing the inner rotor, align the pin ill with the
groove
@.
• Apply
a small quanlity of THREAD LOCK "1342" or THREAD
LOCK SUPER "1322" to the threaded parts of the oil pump
mounting screws , and then tighten t hem.
For USA
-tG 99000-32050: THREAD LOCK "1342"
For the other countries
-tG 99000-32110: THREAD LOCK SUPER "1 322"
•
When installing the oil pump driven gear. align th'" [lin G) with
the groove
@.
http://www.motorcycle.in.th

Suzuki drz 400 2007 Specifications

General

Year	2007
Manufacturer	Suzuki
Model	DR-Z400
Category	Dual-sport
Displacement	398 cc
Bore x Stroke	90.0 mm x 62.6 mm
Compression Ratio	11.3:1
Transmission	5-speed
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Front Brakes	Single disc
Rear Brakes	Single disc
Front Tire	80/100-21
Rear Tire	120/90-18
Seat Height	935 mm (36.8 in)
Fuel System	Mikuni BSR36 carburetor
Ignition	CDI
Rear Suspension	Link type, coil spring, oil damped
Ground Clearance	300 mm
Wheelbase	1, 485 mm
Fuel Capacity	10.0 L (2.6 US gal)
Engine Type	Single-cylinder, four-stroke