Suzuki RGV250L 1990 User Manual

• Remove the lever spacer.
• Draw
out the bearings with the special tools.
09923-73210: Bearing puller (17 mm)
09930-30102: Sliding shaft
CAUTION:
The bearings removed should be replaced with new ones.
CUSHION LEVER
• Remove the three spacers.
• Draw
out the bearings with the special tools.
09943-88210: Bearing installer
09925-98220: Bearing installer
CAUTION:
The bearings removed should be replaced with new ones.
INSPECTION
SWINGARM
Insert the spacer into bearing and check the play by moving
the spacer up and down. If excessive play is noted, replace the
bearing with a newone.
I nspect
the spacer for any flaws or other damage.
CUSH ION LEVER
Inspect the spacer for any flaws or other damage.
Inspect
the spacer into bearing and check the play by moving
the spacer up and down.
If an excessive play is noted, replace
the bearing with a new one.
CHASSIS 7-42

Suzuki RGV250L 1990 Specifications

General

Brand	Suzuki
Model	RGV250L 1990
Category	Motorcycle
Language	English