Oscilloscope Reference Trigger settings (Shared - Independent)
Trigger settings (Shared - Independent)
This feature determines how the instrument applies trigger levels to the input channels:
Shared. Sets the trigger level in common across a ll input channels. Changing the trigger level of one
channel changes the trigger levels of all input channels to the same level.
Independent. Allows you to set a unique trigger level for each input channel. Changing the trigger
level on one channel does not affect the trigger level setting of the other input channels.
Trigger slope
The trigger slope determines whether the instrument finds the trigger point on the rising edge, falling edge,
or both edges of the signal.
Trigger source
The trigger source determines the source of the trigger signal. The input channels are the most commonly
used trigger sources and are available for all trigger types.
NOTE. Youhavetheoptiontoadduser-defined label for analog, reference, bus, and digital sources.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 929
To Next Page
Loading...
Need help?
General
