Tektronix Keithley 4200A-SCS User Manual

In this section:
MPI prober software ............................................................... 14-1
Probe station configuration..................................................... 14-2
Clarius probesites and probesubsites project example .......... 14-4
Commands and error symbols ............................................... 14-8
MPI prober software
MPI supported probers include the TS2000, TS2000-DP, TS2000-HP, TS2000-SE, TS3000, and
TS3000-SE.
To configure and operate one of the supported MPI probers with the Keithley Instruments 4200A-SCS,
you need the MPI Sentio Software Suite application. This application provides access to configuration
and help programs.
The MPI prober computer has MPI Sentio Software Suite installed. This is the main control software
for the MPI prober. It provides the configuration and setup needed so that the prober can be
controlled remotely using the 4200A-SCS.
Software version
The following software version was used to verify the configuration of the MPI probe station with the
4200A-SCS:
• MPI Sentio Software Suite version 2.9
Section 14
Using an MPI Probe Station

Tektronix Keithley 4200A-SCS Specifications

General

Brand	Tektronix
Model	Keithley 4200A-SCS
Category	Measuring Instruments
Language	English