E6582233
F-45
6
6.17 2nd acceleration/deceleration
6.17.1 Switching acceleration/deceleration time 1 & 2
:Acceleration time 2
:Deceleration time 2
: Acceleration/deceleration 1 & 2 switching frequency
Function
Acceleration and deceleration times can be set individually. Select from the following two methods for
selecting and switching.
1) Switching by frequency
2) Switching by terminal
[Parameter setting]
Title Function Ad
ustment ran
e Default settin
Acceleration time 2 0.0 - 3000 (s) 10.0
Deceleration time 2 0.0 - 3000 (s) 10.0
1) Switching according to frequency (automatically switching from the set frequency
to the acceleration/deceleration time)
[Parameter setting]
Title Function Ad
ustment ran
e Default settin
Acceleration/deceleration 1 & 2
switchin
frequenc
0.0 (disabled),
0.1-
0.0
(3) Acceleration at ramp of
acceleration time
(4) Acceleration at ramp of
acceleration time
Output frequency [Hz]
(4)(1)
(2)
Time [s]
0
Set frequency
(3)
(1) Acceleration at ramp of
acceleration time
(2) Acceleration at ramp of
acceleration time
To Next Page
Loading...
Need help?
General