Toshiba TOSVERT VF-nC3E User Manual

E6582233
4
I
 Transportation & installation
Warning
Reference
section
Prohibited
 Do not install or operate the inverter if it is damaged or any component is missing.
This can result in electric shock or fire. Call your Toshiba distributor for repairs.
 Do not place any inflammable objects nearby.
If a flame is emitted due to malfunction, it may result in a fire.
 Do not install in any location where the inverter could come into contact with water or
other fluids.
This can result in electric shock or fire.
1.4.4
1.4.4
1.4.4
Warning
Reference
section
Mandatory
action
 Must be used in the environmental conditions prescribed in the instruction manual.
Use under any other conditions may result in malfunction.
 Mount the inverter on a metal plate.
The rear panel gets very hot. Do not install in an inflammable object, this can result in fire.
 Do not use the inverter without the terminal block cover. This can result in electric shock.
Failure to do so can lead to risk of electric shock and can result in death or serious injury.
 An emergency stop device must be installed that fits with system specifications (e.g. shut
off input power then engage mechanical brake). Operation cannot be stopped immediately
by the inverter alone, thus risking an accident or injury.
 All options used must be those specified by Toshiba.
The use of any other option may result in an accident.
 When using switchgear for the inverter, it must be installed in a cabinet.
Failure to do so can lead to risk of electric shock and can result in death or serious in
j
ur
y
.
1.4.4
1.4.4
1.4.4
1.4.4
1.4.4
9.
Caution
Reference
section
Prohibited
 When transporting or carrying, do not hold by the front panel covers.
The covers may come off and the unit will drop out resulting in injury.
 Do not install in any area where the unit would be subject to large amounts of vibration.
That could result in the unit fallin
g
, resultin
g
in in
j
ur
y
.
2.
1.4.4
Mandatory
action
 When removing and installing the terminal cover with a screwdriver, be sure not to scratch
your hand as this results in injury.
 Pressing too hard on the screwdriver may scratch the inverter.
 Always cut the power supply when removing the wiring cover.
 After wiring is complete, be sure to replace the terminal cover.
 The main unit must be installed on a base that can bear the unit's weight.
If the unit is installed on a base that cannot withstand that weight, the unit may fall
resulting in injury.
 If braking is necessary (to hold motor shaft), install a mechanical brake.
The brake on the inverter will not function as a mechanical hold, and if used for that
pu
r
pose, in
j
ur
y
ma
y
result.
1.3.2
1.3.2
1.3.2
1.3.2
1.4.4
1.4.4

Toshiba TOSVERT VF-nC3E Specifications

General

Brand	Toshiba
Model	TOSVERT VF-nC3E
Category	Inverter
Language	English