E6582233
D-8
4
Reset parameters to default settings
Use the parameter to reset all parameters back to their default settings. To use this function, set parameter
=.
Refer to section 4.3.2 for details.
Call saved customer settings
Customer settings can be batch-saved and batch-called.
These settings can be used as customer-exclusive default settings.
To use this function, set parameter = or .
Refer to section 4.3.2 for details.
Search changed parameters
Automatically searches for only those parameters that are programmed with values different from the standard
default setting. To use this function, select the parameter.
Refer to section 4.3.1 for details.
4.3.1 Searching for and resetting changed parameters
: Automatic edit function
Note 1: If you reset a parameter to its factory default, the parameter will no longer appear in .
Note 2: It may take several seconds to display changed parameters because all data stored in the user parameter
group is checked against the factory default settings. To cancel a parameter search, press the MODE
key.
Note 3: Parameters which cannot be reset to the default setting after setting to are not displayed.
⇒ Refer to section 4.3.2 for details.
• Function
Automatically searches for only those parameters that are programmed with values different from the standard
default setting and displays them in the . Parameter setting can also be changed within this group.
To Next Page
Loading...
Need help?
General