19.2.4. Variables Tab
Description The Variables tab in the Program Tab shows the live values of variables in the running
program.
The variables appear as a list in the pane under the Variables tab on the right side of
the screen.
Variables only appear when there is information to display and remain visible between
program runs.
Show Waypoints You can check the Show Waypoints box to display the waypoint variables in the
running program.
In the Variables pane, you can also use the following options:
•
Select Show Waypoints to show waypoint script variables in the variables list.
The robot program uses script variables to store information about waypoints.
Select the Show Waypoints checkbox, under Variables to show script variables
in the variables list.
•
Select Show only favorite variables to only view favorite variables on the
Variables Tab. This is the same as in the Variables pane on the Run Tab (See
18 Run Tabon page169).
User Manual 187 UR10e
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
