10.Declarations and Certificates (original
EN)
EU Declaration of Incorporation (DOI) (in accordance with 2006/42/EC Annex IIB) original EN
Manufacturer Universal Robots A/S
Energivej 25,
DK-5260 Odense S Denmark
Person in the Community
Authorized to Compile the
Technical File
David Brandt
Technology Officer, R&D
Universal Robots A/S, Energivej 25, DK-5260 Odense S
Description and Identification of the Partially-Completed Machine(s)
Product and Function: Industrial robot multi-purpose multi-axis manipulator with control box &
with or without teach pendant Function is determined by the completed
machine (robot application or cell with end-effector, intended use and
application program).
Model : UR3e, UR5e, UR10e, UR16e (e-Series): Below cited certifications and
this declaration include:
•
Effective October 2020: Teach Pendants with 3-Position Enabling
(3PE TP) & standard Teach Pendants (TP).
•
Effective May 2021: UR10e specification improvement to 12.5kg
maximum payload.
Note:This Declaration of Incorporation is NOT applicable when the UROEMController
is used.
Serial Number: Starting 20235000000 and higher
year
e-Series
3=UR3e, 5=UR5e, 3=UR3e, 0=UR10e (10kg), 2=UR10e(12.5),
6=UR16e
sequential numbering, restarting at 0 each year
Incorporation: Universal Robots e-Series (UR3e, UR5e, UR10e and UR16e) shall only
be put into service upon being integrated into a final complete machine
(robot application or cell), which conforms with the provisions of the
Machinery Directive and other applicable Directives.
It is declared that the above products fulfil, for what is supplied, the following directives as detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible
for determining that completed machine fulfils all applicable Directives and providing the Declaration of
Conformity.
I. Machinery Directive
2006/42/EC
The following essential requirements have been fulfilled: 1.1.2, 1.1.3,
1.1.5, 1.2.1, 1.2.4.3, 1.2.5, 1.2.6, 1.3.2, 1.3.4, 1.3.8.1, 1.3.9, 1.5.1, 1.5.2,
1.5.5, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3, 4.1.3, Annex VI. It is
declared that the relevant technical documentation has been compiled in
accordance with Part B of Annex VII of the Machinery Directive.
II. Low-voltage Directive
2014/35/EU
III. EMC Directive 2014/30/EU
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used below.
User Manual 87 UR10e
10.Declarations and Certificates (original EN)
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
