25.2.4. Security
Description The default admin password for a Universal Robots robot arm controller is “easybot”. It
is a factory setting, configured on all new robots.
WARNING
It is critically important that you change this default admin password
to your own password, to ensure cyber security of your robot.
As of PolyScope update 5.14 all security settings are set by default to restrictive
(disabled or blocked). (This only applies to new robots and newly created SD-cards.
Otherwise, refer to a guide “Secure setup of UR cobots”).
If any of the settings are needed to be enabled for your application, you can easily
enable them in the Security screen.
General
Description In the General section of the security settings, you can enable magic files and
configure inbound connections.
A Magic File is a script on a USB drive that executes once it is inserted into the system.
This function is disabled by default to make sure that magic files are not unknowingly
executed on PolyScope.
Magic Files Magic files have unrestricted privileges to make system changes, thus they must be
considered as a security liability.
UR10e 346 User Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
