Universal Robots UR e Series User Manual

Add a waypoint
to a robot
program
1. In your Robot Program, select the place where you wish to add a Move.
2. Under Basic, tap Move.
A waypoint is added to the robot program together with the Move node.
Add additional
waypoints to a
Move or
Waypoint
1. In your Robot Program, select a Move node or Waypoint node.
2. Under Basic, tap Waypoint.
The additional waypoint is added in the Move node. This waypoint is part of the
Move command.
The additional waypoint is added under the waypoint that you selected in the robot
program.
UR10e 200 User Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR e Series Specifications

General

Brand	Universal Robots
Model	UR e Series
Category	Robotics
Language	English