Xerox Wide Format 6605 User Manual

Edit Job Settings
Reduce/Enlarge
The Reduction/Enlarge feature has variable options for scaling the images being copied.
The feature provides the ability to customize the preset reduction/enlargement settings
beyond the basics discussed here. The factory default setting is 100%.
The reduction and enlargement features available are:
• Scale Factor: The Scale Factor from 25% to 400% is set by pressing the increase
and decrease arrows in single increments. The numbers pause at standard reduction
and enlargement settings. You can quickly change the percentage by entering in the
numbers using the numeric entry keypad. Touch the percent field to get a keypad.
Here you type in the number desired.
• Presets and More...: The Presets and More... feature displays a Scale Factor screen
to allow Variable or Preset Percentages. You can customize one percentage value as
desired.
• Auto: The ratio is automatically set up based on the original document size and the
installed media size. The document is copied to fit the currently selected media.
• Media Types: Bond, Vellum and Film
Media Types
• Bond
• Vellum
• Film
Media Source
The Media Source selections enable you to select from where the media for the copy
job is fed. The factory default setting is Auto Select. The definition describing each
selection under Media Source is the media currently loaded.
Output Format
Print jobs default to the best fit for the selected media size.
• Synchronized: The Media Roll is cut the same size as the original.
• Preset:The Media Roll is cut to a standard size that you select. The standard size
options displays when you select the Preset option.
• Manual:The Media Roll is cut to a customized size that you specify (x and y
coordinates). A screen with data entry fields displays when you select Manual.
Xerox
®
Wide Format 6604/6605 Solution
™
4-4
User Guide
Job Information

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English