Controller Cables and Connectors
The six communication pathway cables (called out as item 8 on the Back Panel Connector)
are described below.
• USB - Scanner to Controller - provides status and image information.
• USB - Printer to Controller - provides status and image information.
• USB - Power Module to Controller - provides status of the front Power Switch and
enables power to the Printer.
• USB - User Interface to the Controller.
• Audio Cable - UI to Controller for speaker tones, such as key beeps and alert tones.
• Video Cable - UI to Controller for displaying monitor screen contents.
Both Video Data and Command Status information is transmitted via the same USB
Interface. The Accxes Controller downloads Printer software/firmware through the
command status interface on the USB Port.
Scanner
The Xerox Wide Format 6604/6605 Solution is an integrated solution for basic copying
and electronically scanning and printing copies of the images for engineering and
architectural size documents. The scanner produces images up to 40 inches wide (1016
mm) and can send the image to a mailbox, a File Transfer Protocol (FTP) location or a
remote printer.
Loading Documents
To minimize wasted media due to image quality defects, properly loading the original
document is emphasized.
Documents are properly loaded when aligned with the Left Side Justified Line rather
than center justified. Load image side face up into the Scanner. Take notice of feeding
the document evenly so both left and right sides enter simaltaneously.The document
feed has an instant detection mechanizm so inserting the document quickly ensures it
is properly grasped and fed.
Xerox
®
Wide Format 6604/6605 Solution
™
1-8
User Guide
Product Overview
To Next Page
Loading...
Need help?
General