Xerox Wide Format 6605 User Manual

4. Select Scan Offset.
5. Select Enabled to define the amount of scan offset.
6. Set up the scan offset, using either the numbers keypad or the scroll buttons.
7. Select Save when finished.
TIP
When a Reduce/Enlarge ratio of other than 100% has been set up for the copy
job, the scan start position will be enlarged or reduced proportionately.
Scanner Media Thickness
The Scanner Media Thickness setting adjusts the scanner controls to provide the best
image quality available for either thin or thick originals. The default is zero for normal
bond type.
NOTE
Skewed images can be incorrectly diagnosed as a need for Stitch Alignment
when a simple Scanner Media Thickness adjustment was needed instead.
1. Select Copy on the Services menu.
The Copy screen displays.
2. Select the Advanced Settings tab.
3. Select Scanner Media Thickness.
Prior to scanning the original, specify the thickness of it as listed below:
3-17
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Scanning Documents

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English