Xerox Wide Format 6605 User Manual

The Control Panel options allows you to set the following features:
• Sound Settings
• Configure Timers
• Set Scan Start mode
• Calibrate Touch Screen
Sound Settings
The Sound Settings options determine whether or not tones will sound when the user
presses control panel buttons, makes an invalid entry on the control panel or touch
screen, or when a fault occurs. The factory default setting for all audible tones is On.
1. Press the Services button on the Control Panel.
2. Select Machine Info from the Services menu screen.
The Machine Info Screen displays.
3. Select the Administration tab.
4. Select Control Panel.
The Control Panel menu displays.
5. Select Sound Settings.
The Sound Settings... screen displays.
6. Move the slider to the desired sound volume.
7. Select Save and Close.
Configure Timers
The Configure Timers selection of the Control Panel screen allows you to set up the
values for the time-out features. The timeout features are defined on the following
pages.
Low Power Timeout
Sleep Timeout
Features Timeout
File Deletion Timeout
Print Interrupt Timeout
Low Power Timeout
This setting is the amount of time that must elapse since the last user operation, such
as a button press, until the machine enters the Low Power mode. The setting range is 5
to 240 minutes. The default setting for Low Power mode is 15 minutes.
1. Press the Services button on the Control Panel.
2. Select Machine Info from the Services menu screen.
Xerox
®
Wide Format 6604/6605 Solution
™
5-16
User Guide
System Administrator

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English