Xerox Wide Format 6605 User Manual

Finishing
The Finishing feature is an option, requiring a feature key to activate. If you obtain this
feature, the System Administrator can enable it at any time by sending a special feature
key file to the machine. Contact your Xerox Sales Representative for ordering
information.Finishing is displayed on the Web Printer Management Tool, test prints and
on the User Interface as indicated below.
1. Select Copy on the Services menu.
The Copy screen displays.
2. Select Finishing.
The Finishing selections display.
3. Select the required Folder Program.
4. Select More... for additional finishing options.
The More Finishing screen displays with the following:
• Punch
• Tab
• Margins
• Crossfold
Setting Up the Recall Selections
Recall Tab
This feature enables you to recall the last job run and all the settings associated with it.
The recalled image can then be printed without rescanning the originals.
This feature is enabled or disabled by the System Administrator within
Machine Information > Administration > General Administration
> Enable/Disable Image Recall.
The default setting is Enabled.
If Immediate Image Overwrite is disabled and Image Recall is enabled, you can recall
the last copy. However, this feature is not available if the System Administrator has
enabled Immediate Image Overwrite.
Refer to the Image Recall section of the System Administration chapter for more details.
1. Select Copy on the Services menu.
Xerox
®
Wide Format 6604/6605 Solution
™
2-26
User Guide
Printing and Copying Documents

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English