Xerox Wide Format 6605 User Manual

System Power On
The procedure below describes the process for powering up the system from a cold start
(the system assumes that both the Printer and the Controller are powered down
completely).
1. Move the Printer Circuit Breaker Switch up, to the On [ | ] position.
2. Move the Printer Power Switch to the On [ | ] position.
3. Press the Power Button on the front of the Controller.
The Power Button light illuminates. After about one-half minute, the Control Panel
displays the Printer Warming Up message. The machine becomes print ready in about
three minutes.
Document Input
Documents that match any of the following sizes may be used.
Table 12: Document Input
ThicknessOriginal Size
Flat paper (0.05 - 3.2 mm)Width: 4.5 - 41 inches (114 - 1050 mm) (1016 mm Active Scan)
(0.3 mm max)Length: 7.8 - 644 inches (200-16510 mm)
NOTE
The maximum length that can be scanned to the network is 650 inches. The
maximum copy length is 590.55 inches (15 meters).
Xerox
®
Wide Format 6604/6605 Solution
™
1-20
User Guide
Product Overview

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English