Xerox Wide Format 6605 User Manual

Table 3: Machine Components (Front View Doors Open)
FunctionComponentNum.
Open and load media here when making manual feed
copies or prints.
Manual Feed-in Shelf
(Bypass)
1
Open the Manual Feed-in Shelf and then the Fuser Cover
to clear a paper jam in the fuser.
Fuser Cover2
Switches the media heater on/off. Powering on the media
heater helps prevent the media from wrinkling. The media
heater switch is normally on.
Media Heater Switch3
Cuts the lead edge of roll media.Cutter Button4
Covers the cutter to cut media. Normally, do not open
this cover.
Cutter Cover5
Load the roll media here.Roll 16
A second roll (shown here) may be installed below Roll
1. This roll is optional.
Roll 27
Controller Front View
The Accxes Controller communicates with the Print Engine/machine via the Command
Status Interface. The Command Status Interface software provides status messages
about the operation of the print engine.
1-5
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Product Overview

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English