Xerox Wide Format 6605 User Manual

Table 1: Machine Components (Front View)
FunctionComponentNum.
Load original here, face up.Scanner Feed-in Shelf1
Lift the Scanner Lid to clean the main roller
and sensors or to remove a paper jam.
Scanner2
Also known as the UI, contains the Touch
Screen and the Control Panel. This is where
the operator programs jobs and configures
the Xerox Wide Format 6604/6605
Solution settings.
User Interface3
Contains selection buttons and
copy/print/scan services access.
Control Panel4
Copies and prints are delivered here, face
up.
Printer Exit Port5
Open these doors to clear media jams and
load media.
Front Doors6
Receives and stacks small size copies and
prints (8.5" to 18"/216 mm to 457 mm)
when in the open position. About 20 sheets
of Bond paper can be stacked. Refer to the
label for usage information.
Small Size Paper Flaps (4 total)7
Assembly that receives and stacks medium
and large size copies and prints. The
assembly accommodates copies/prints of
17" to 48"/432 mm to 1219 mm when the
Extender Assemblies are hooked at the
rear of the wireform, and 48"/1219 mm
and larger when the Extender Assemblies
are unhooked. About 20 sheets of Bond
paper can be stacked. Refer to the label
on the front of the machine for usage
information.
Document Catch Guides8
When unhooked from the rear of the copy
catch tray wireform, accommodate 48"
(1219 mm) and longer copies and prints.
Extender Assemblies9
Contains communication software for the
Print Engine.
Accxess Controller10
1-3
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Product Overview

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English