Xerox WorkCentre 6027 User Manual

Copying
138 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
Making Copies
You can make copies using the document glass or the automatic document feeder.
To make copies using the document glass:
1. For paper that cannot be fed using the automatic document feeder, use the document glass.
2. To clear previous control panel copy settings, press the Clear All button.
3. Lift the automatic document feeder, then place the original face down in the upper left corner of
the document glass.
4. At the control panel, touch Copy.
5. Using the control panel keypad, enter the desired number of copies. The number of copies appears
on the upper right corner of the display. To reset the number of copies to 1, press Clear All.
For details on how to customize the copy settings, see Adjusting Copying Options on page 141.
6. Press the green Start button.
To make copies using the automatic document feeder:
1. For single or multiple pages, use the automatic document feeder.
2. To clear previous control panel copy settings, press the Clear All button.
3. Remove any staples and paper clips from the pages, then place them face up in the automatic
document feeder.
4. Insert originals face up with the top of the page entering the feeder first.
5. Adjust the paper guides so they fit against the originals.

Xerox WorkCentre 6027 Specifications

General

Brand	Xerox
Model	WorkCentre 6027
Category	All in One Printer
Language	English