Xerox WorkCentre 6027 User Manual

Features
28 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
To view the IP address on the control panel when Display Network Settings is not enabled:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings > Network > Ethernet > TCP/IP.
3. Record the IP address from the display.
4. To return to the Services Home menu, press the Services Home button.
Finding the IP Address on the Configuration Page
1. At the printer control panel, press the Machine Status button.
2. Touch Information Pages.
3. Touch Configuration, then touch Print.
IPv4 and IPv6 address information is located in the Network Setup section of the Configuration
Page under TCP/IPv4 and TCP/IPv6.
Accessing the Printer
The system administrator can set access rights on the printer to ensure that unauthorized users cannot
access the printer.
Logging In
Logging in is the process by which you identify yourself to the printer for authentication. If
authentication is set, to access printer features, you log in with your user credentials.
Logging In at the Control Panel
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Type the passcode using the keypad.
4. Touch OK.
Note: Repeat steps 3 and 4 of the procedure to access each service that is password protected.

Xerox WorkCentre 6027 Specifications

General

Brand	Xerox
Model	WorkCentre 6027
Category	All in One Printer
Language	English