Xerox WorkCentre 6027 User Manual

Features
Xerox
®
WorkCentre
®
6027 Multifunction Printer 25
User Guide
Power Saver Mode
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
There are two levels of Power Saver mode.
• Mode 1 (Low Power): The printer shifts from Ready mode to Low Power mode to reduce standby
power consumption.
• Mode 2 (Sleep): The printer shifts from Low Power mode to Sleep mode for a greater reduction in
power consumption.
Changing Power Saver Mode Settings on the Control Panel
To change the Power Saver mode settings:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Power Saver Timer.
5. Touch either Low Power Timer or Sleep Timer.
6. To increase or decrease the number of minutes before the printer enters Power Saver mode, touch
the Plus (+) or Minus (-) buttons, then touch OK.
Exiting Power Saver Mode
The printer exits Power Saver mode automatically when it receives data from a connected device.
To exit Power Saver mode manually, on the control panel, press the Power Saver button.

Xerox WorkCentre 6027 Specifications

General

Brand	Xerox
Model	WorkCentre 6027
Category	All in One Printer
Language	English