Xerox WorkCentre 6027 User Manual

Installation and Setup
38 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
To connect using manual SSID setup:
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab.
3. Touch Admin Setting > Network.
4. Touch Wireless > Wireless Setup Wizard.
5. Select the Manual SSID Setup check box, then touch Next.
6. Enter the network SSID, then touch Next.
7. Select a network mode, then touch Next.
a. Enter the passcode or WEP key, then touch OK.
Connecting to Wi-Fi Direct
You can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,
using Wi-Fi Direct.
Note: Wi-Fi Direct is disabled by default.
Connecting with Wi-Fi Direct from Your Mobile Device
To connect with Wi-Fi Direct, follow the directions provided with your mobile device.
Disabling Wireless Networking from the Control Panel
You can disable the wireless network from the printer control panel.
To disable wireless networking from the Control Panel:
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab.
3. Touch Admin Setting > Network > Wi-Fi.
4. Select Off, then touch OK.

Xerox WorkCentre 6027 Specifications

General

Brand	Xerox
Model	WorkCentre 6027
Category	All in One Printer
Language	English