Xerox WorkCentre 6027 User Manual

Maintenance
164 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
11. Touch Enter Registration Value.
12. To enter values for each LY, LM, and LC fields, touch Plus (+) or Minus (-) to match the numbers that
you circled earlier.
13. Touch Next.
14. To enter values for each RY, RM, and RC fields, touch Plus (+) or Minus (-) to match the numbers that
you circled earlier.
15. Touch Next.
16. To enter values for each PY, PM, and PC fields, touch Plus (+) or Minus (-) to match the numbers that
you circled earlier.
17. Touch OK.
18. Print another Registration Chart, then repeat the process until you complete the color registration
corrections.
Refreshing the Bias Transfer Roller
Use the BTR Refresh procedure to reduce paper curling and improve paper discharge.
To refresh the bias transfer roller:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Select BTR Refresh, then press Start.
Adjusting the Altitude
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Touch Adjust Altitude.
6. To select an altitude from the list, touch it.
7. Touch OK.
8. To return to the Services Home menu, press the Services Home button.

Xerox WorkCentre 6027 Specifications

General

Brand	Xerox
Model	WorkCentre 6027
Category	All in One Printer
Language	English