3-9
INSP
ADJ
E
POWER UNIT
4. Install:
● Oil filter 3
NOTE:
Lubricate the rubber seal with engine oil
before installation.
T
R
.
.
Oil filter:
18 Nm (1.8 m • kg, 13.3 ft • lb)
3
5. Add:
● Engine oil
6. Install:
● Oil filler cap
7. Check:
● Engine oil level
Refer to “Engine oil level”.
NOTE:
● Run the engine for several minutes and
then check the engine oil level.
● If the engine oil is still not within the
proper level, add/drain as needed.
Recommended engine oil:
4 stroke motor oil
API: SE, SF, SG or SH
SAE: 10W-30, 10W-40
Oil quantity:
with oil filter
4,700 cm
3
(159 US oz, 165 Imp oz)
without oil filter
4,500 cm
3
(152 US oz, 158 Imp oz)
3
Timing belt
1. Inspect:
● Timing belt
Wear/damage → Replace.
To Next Page
Loading...
Need help?
General
