Yealink T5 Series IP Phones User Guide
100
Transferring a Call by BLF List Key
When there is already an active call on the IP phone, you can transfer the active call to the monitored user by pressing
the BLF List key.
The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode via
Dsskey feature configured by your system administrator.
Topics
Performing a Blind Transfer
Performing a Semi-attended/Attended Transfer
Performing a Blind Transfer
Before You Begin
Check with your system administrator to make sure that the Transfer Mode via Dsskey is set to Blind Transfer.
Procedure
1. During a call, press the BLF List key of the monitored line which you want to transfer this call to.
Performing a Semi-attended/Attended Transfer
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer.
Procedure
1. During a call, press the BLF List key of the monitored line which you want to transfer this call to. The phone will dial
out the number of the monitored line.
2. Press the BLF List key of the monitored user again or Transfer to complete the transfer when the monitored user
receives ringback or after the monitored user answers the call.
Retrieving a Call by BLF List Key
You can use the BLF List key to retrieve a call which is parked to the monitored line directly.
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Press the desired BLF List key to retrieve a call that is parked to the monitored line.
Barging In an Active Call by BLF List Key
You can use the BLF List key to barge in a conversation and set up a conference call.
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Press the BLF List key.
The IP phone dials out the barge-in code followed by the monitored line, and then you can join the call. Each of
the three parties can hear the other two parties.
To Next Page
Loading...
Need help?
General
