Yealink T29G User Manual

Customizing Your Phone
25
Screen Saver
The screen saver will automatically start when the IP phone is idle for the preset waiting time. You can stop the screen
saver at any time by pressing any key. When your phone is idle again for a preset waiting time, the screen saver starts
again.
By default, your screen displays a built-in picture when screen saver starts. You can set custom pictures as the screen
saver uploaded by your system administrator. You can also add personal pictures on your phone using a USB flash
drive.
The time & date, certain status icons (for example, auto answer, DND, a new text message), or custom information (for
example, notifications or company logo) can also display on the screen saver.
Note
The custom information is preset by your system administrator.
Topics
Changing the Waiting Time for Screen Saver
Enabling/Disabling Time & Date and Status Icons Display
Adding a Screen Saver from a USB Flash Drive
Setting the Screen Saver Type
Changing the Waiting Time for Screen Saver
You can change the waiting time for screen saver.
Procedure
1. Navigate to Menu->Basic->Display->Screensaver.
2. Select the desired waiting time from the Wait Time field.
3. Press Save.
Enabling/Disabling Time & Date and Status Icons Display
You can enable or disable your phone to display Time & Date and Status Icons on the screen saver.
Before You Begin
You cannot enable Time & Date and status icons display if your system administrator has set your phone to display cus-
tom information on the screen saver.
Procedure
1. Navigate to Menu->Basic->Display->Screensaver.
2. Select the desired value from the Display Clock field.
3. Press Save.
The Time & Date and status icons displays on the screen saver, as shown below:

Yealink T29G Specifications

General

Brand	Yealink
Model	T29G
Category	IP Phone
Language	English