Call Features
69
Deactivating Call Forward
Forwarding All Incoming Calls on All Lines
Before You Begin
Check with your system administrator if the forward on code or off code is required. If required, get it from your system
administrator.
Procedure
1. Navigate to Menu->Features->Call Forward.
2. Select a desired forwarding type and select Enabled from the corresponding field.
3. Do one of the following:
l Enter the contact number you want to forward incoming calls to in the Forward to field.
l Highlight the Forward to field. Press Directory, and then select a desired contact from the Directory list(s).
4. If you select the No Answer Forward option, select the desired ring time to wait before forwarding from the After
Ring Time field.
5. (Optional.) Enter the always/busy/no answer forward on code or off code respectively in the On Code or Off Code
field.
6. Press Save.
The call forward icon on the Idle screen indicates that the call forward is activated.
Tip
When the phone is idle, you can press a Forward key to activate always forward feature to a specific contact.
Forwarding All Incoming Calls on Specific Lines
By default, the forward setting applies to all lines on your phone. Your system administrator can change the forward
mode to Custom so that you can set Forward setting for specific lines.
Before You Begin
The call forward mode is set to Custom. Check with your system administrator if the forward on code or off code is
required. If required, get the forward on code or off code from your system administrator.
Procedure
1. Navigate to Menu->Features->Call Forward.
2. Select a desired line.
3. Select a desired forwarding type and select Enabled from the corresponding field.
4. Do one of the following:
l Enter the contact number you want to forward incoming calls to in the Forward to field.
l Highlight the Forward to field. Press Directory, and then select a desired contact from the Directory list(s).
5. If you select the No Answer Forward option, select the desired ring time to wait before forwarding from the After
Ring Time field.
6. (Optional.) Enter the always/busy/no answer forward on code or off code respectively in the On Code or Off Code
field.
7. Press Save.
The forward icon appears on the desired line. If you activate forward on the default line, the forward icon will
appear both on the line and in the status bar.
To Next Page
Loading...
Need help?
General
