Yealink T5 Series IP Phones User Guide
66
Resuming a Held Call
Procedure
1. Press the HOLD key again, corresponding line key or Resume.
If multiple calls are placed on hold, select the desired call first.
Swapping Between Active and Held Calls
You can easily switch between active and held calls.
Procedure
Do one of the following to swap the active and held calls:
l If the call is active, press the Swap soft key.
l If the call is held, press the corresponding line key to swap to the active call.
Do Not Disturb (DND)
DND enables your phone to reject all incoming calls automatically when you do not want to be interrupted. You can
enable DND globally on the phone or enable DND for specific lines.
If you want to receive specific numbers when DND is enabled, you can ask your system administrator to set DND
Authorized Numbers.
Note
Check with your system administrator to find out if the DND feature is available on your phone.
Topics
Rejecting Calls with DND on All Lines
Rejecting Calls with DND on Specific Lines
Deactivating DND
Rejecting Calls with DND on All Lines
You can activate DND for all the lines on your phone. The phone will reject all incoming calls automatically.
Note
If both DND and busy forward are activated on the phone, calls will be forwarded to the configured destination number.
Procedure
1. Navigate to Menu->Features->DND.
2. Select Enabled from the DND Status field.
3. Press Save.
The DND icon appears in the status bar.
To Next Page
Loading...
Need help?
General
