Customizing Your Phone
35
Do the following on the IP phone:
l Place a call. Press the My Mobile key first, and then place a call or multiple calls to the mobile contact.
l Answer a call. An incoming call to your mobile phone is also shown on the IP phone, you can answer the call on the
IP phone. The phone will firstly match the contacts in the mobile contacts directory to present the caller/callee iden-
tity when receiving/placing a mobile phone call.
l During the call, you can hold/resume, mute/unmute or end the call on the IP phone.
Related Topics
Placing Calls
Answering Calls
Ending Calls
Call Mute
Call Hold
Activating the Bluetooth Mode
Viewing the Bluetooth Device Information
You can view the paired Bluetooth device information.
Before You Begin
Procedure
1. Navigate to Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Select the desired Bluetooth device. Press Option, and then select Detail to view the Bluetooth device information:
l Device Name: the name of the Bluetooth device.
l MAC: the MAC address of the Bluetooth device.
l Mobile Contacts Sync: mobile contacts synchronization when Bluetooth-enabled mobile phone is connected.
Related Topics
Activating the Bluetooth Mode
Pairing and Connecting the Bluetooth-Enabled Mobile Phone
Editing Device Name of your Phone for Recognition
You can edit the device name of your phone to display in scanning list of other Bluetooth devices.
Before You Begin
Make sure that the Bluetooth mode is activated.
Procedure
1. Navigate to Menu->Basic->Bluetooth->Edit My Device Information.
The LCD screen displays the device name and Bluetooth dongle MAC address.
2. Enter the desired name in the Device Name field.
3. Press Save.
Related Topics
Activating the Bluetooth Mode
To Next Page
Loading...
Need help?
General
