Yealink T29G User Manual

Yealink T5 Series IP Phones User Guide
110
Procedure
1. Navigate to Menu->Message->Text Message->Inbox (Sentbox, Outbox or Draftbox).
2. Highlight the desired message.
3. Press Option, select Delete.
A confirmation message is displayed, confirming that you want to delete the message.
4. Press OK to delete.
You can also delete all text messages by selecting the Delete All.
Voice Mail
Voice Mail feature allows you to leave voice mails for someone or listen to your voicemail messages on your IP phone.
This feature is set up on the server side and not all servers support this feature.
Topics
Setting the Voice Mail Code
Receiving a Voice Message
Leaving Voice Mails
Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
Before You Begin
Get the voice mail code from your system administrator.
Procedure
1. Navigate to Menu->Message->Voice Mail->Set Voice Mail Code.
You can also press the MESSAGE key when the voice mail code is not configured.
2. Enter the voice mail code (for example, *4) in the desired account field.
3. Press Save.
Receiving a Voice Message
When receiving a new voice mail, the phone plays a warning tone and the power LED indicator slowly flashes red. A
message of “n New Voice Mail(s)” (“n” indicates the number of unread voice messages) is displayed on the LCD screen.
If the voice mail prompt box disappears, it will not pop up again unless the user receives a new voice mail or the user
re-registers the account that has unread voice mail(s).

Yealink T29G Specifications

General

Brand	Yealink
Model	T29G
Category	IP Phone
Language	English