Yealink T29G User Manual

Yealink T5 Series IP Phones User Guide
36
Deleting the Paired Bluetooth Device
You can delete your Bluetooth device from your phone. When you delete the Bluetooth device, it disappears from the
Paired Bluetooth Device list.
Procedure
1. Navigate to Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Press Option, and then select Delete or Delete All.
A confirmation message is displayed, confirming that you want to delete the device.
3. Press OK to delete.
Disconnecting the Bluetooth Device
You can disconnect the Bluetooth device from your phone. After you disconnect the Bluetooth device, it remains
paired so you can easily connect it to your IP phone next time.
Procedure
1. Navigate to Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Highlight the connected Bluetooth device, and then press Disconnect.
The Bluetooth device is disconnected when deactivating the Bluetooth mode.
Tip
You can quickly disconnect your Bluetooth headset by turning your headset off. When you turn your Bluetooth headset on,
the Bluetooth headset is connected again.
Related Topics
Deactivating the Bluetooth Mode

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)