EasyManuals Logo

APRILIA SX 125 User Manual

APRILIA SX 125
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Grip the two connectors and disconnect them by pulling them in opposite directions.
If any signs of dirt, rust, moisture, etc. are noted, clean the inside of the connector carefully
with a jet of compressed air.
Ensure that the cables are correctly fastened to the internal connector terminals.
Then connect the two connectors, ensuring that they couple correctly (if fitted with clips, you
will hear them "click" into place).
CAUTION
DO NOT DISCONNECT CONNECTORS BY PULLING THE CABLES.
NOTE
THE TWO CONNECTORS CAN ONLY BE CONNECTED IN ONE DIRECTION: CONNECT THEM
THE RIGHT WAY ROUND.
TIGHTENING TORQUES
CAUTION
REMEMBER THAT THE TIGHTENING TORQUES FOR ALL FASTENING ELEMENTS ON WHEELS,
BRAKES, WHEEL AXLES AND ANY OTHER SUSPENSION COMPONENTS PLAY A KEY ROLE
IN ENSURING VEHICLE SAFETY AND MUST COMPLY WITH SPECIFIED VALUES. CHECK THE
TIGHTENING TORQUES OF FASTENING ELEMENTS ON A REGULAR BASIS AND ALWAYS USE
A TORQUE WRENCH TO REASSEMBLE THESE COMPONENTS. FAILURE TO COMPLY WITH
THESE RECOMMENDATIONS MAY CAUSE ONE OF THESE COMPONENTS TO LOOSEN OR
EVEN DETACH, CAUSING A WHEEL TO LOCK OR COMPROMISING VEHICLE HANDLING. THIS
MAY LEAD TO FALLS, WITH THE RISK OF SERIOUS INJURY OR DEATH.
Running-in
Engine run-in is essential to ensure engine long life and correct operation. Twisty roads and gradients
are ideal to run in engine, brakes and suspensions effectively. Vary your riding speed during the run-
in. This ensures that components operate under both "loaded" and "unloaded" conditions, allowing the
engine components to cool.
CAUTION
THE FULL PERFORMANCE OF THE VEHICLE IS ONLY AVAILABLE AFTER THE SERVICE AT
THE END OF THE RUN-IN PERIOD.
Follow the guidelines detailed below:
Do not twist the throttle grip abruptly and completely when the engine is working at a low
revs, either during or after run-in.
During the first 100 km (62 miles) brake carefully to avoid rough and long braking. That is
to permit the adequate adjustment of the pad friction material to the brake discs.
Vehicle identification
CAUTION
CHANGING THE IDENTIFICATION CODE IS A CRIME THAT MAY BE PUNISHED WITH SERIOUS
CRIMINAL CHARGES. FURTHERMORE, THE LIMITED WARRANTY FOR NEW VEHICLES WILL
BE CANCELLED IF THE VEHICLE IDENTIFICATION NUMBER (VIN) HAS BEEN MODIFIED OR
CANNOT BE QUICKLY DETERMINED.
Characteristics RX SX 125
CHAR - 10

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA SX 125 and is the answer not in the manual?

APRILIA SX 125 Specifications

General IconGeneral
Displacement124.2 cc
Cooling SystemLiquid cooled
Fuel SystemElectronic fuel injection
Transmission6-speed
Rear SuspensionMonoshock
Front Tire100/80-17
Rear Tire130/70-17
Compression Ratio12.5:1
StarterElectric
ClutchWet multi-plate
Front Brake Disc300 mm
Rear Brake Disc220 mm
Dry Weight134 kg
Bore x Stroke58 mm x 47 mm
Max Power11 kW (15 HP) @ 10, 000 rpm
Front Suspension41 mm USD fork
Front BrakeSingle 300 mm disc
Rear BrakeSingle disc
Fuel Tank Capacity7 liters
FrameSteel perimeter
Engine TypeSingle-cylinder, 4-stroke

Related product manuals