EasyManuals Logo

APRILIA SX 125 User Manual

APRILIA SX 125
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Take out the spark plug tube.
Remove the spark plug with the sup-
plied wrench.
Gearbox Oil
Inspection
NOTE
PARK THE VEHICLE ON SAFE AND LEVEL GROUND.
Stop the engine and let it cool off for at least ten minutes so that the oil in the crankcase
flows down and cools as well.
Keep the vehicle upright with both wheels on the ground.
FAILURE TO FOLLOW THESE OPERATIONS MAY RESULT IN AN INCORRECT READING OF
THE ENGINE OIL LEVEL.
Make sure the oil level covers the
checking sight glass (1) completely.
TOPPING-UP
If necessary, top up:
Unscrew and remove the filler plug (2).
Pour a small amount of oil and wait about a minute until the oil flows evenly into the crank-
case.
Make sure the oil level covers the sight glass (1) completely.
If that does not occur, top-up again with small quantities of oil until the recommended level
is reached by checking through the sight glass (1).
At the end of the operation, screw and tighten the filler plug (2).
Maintenance RX SX 125
MAIN - 26

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA SX 125 and is the answer not in the manual?

APRILIA SX 125 Specifications

General IconGeneral
Displacement124.2 cc
Cooling SystemLiquid cooled
Fuel SystemElectronic fuel injection
Transmission6-speed
Rear SuspensionMonoshock
Front Tire100/80-17
Rear Tire130/70-17
Compression Ratio12.5:1
StarterElectric
ClutchWet multi-plate
Front Brake Disc300 mm
Rear Brake Disc220 mm
Dry Weight134 kg
Bore x Stroke58 mm x 47 mm
Max Power11 kW (15 HP) @ 10, 000 rpm
Front Suspension41 mm USD fork
Front BrakeSingle 300 mm disc
Rear BrakeSingle disc
Fuel Tank Capacity7 liters
FrameSteel perimeter
Engine TypeSingle-cylinder, 4-stroke

Related product manuals