Name: APRILIA SX 125
Brand: APRILIA
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Removing

•

Loosen the chain tension.

•

Rotate the rear wheel until the master

link can be identified.

•

Slide off the clip.

•

Remove the plate underneath.

•

Remove the master link from the op-

posite side.

•

Remove the chain.

CAUTION

REPLACE THE ENTIRE UNIT IF THE CHAIN IS PARTICU-

LARLY WORN.

inspection

Also check the following parts and make sure that the chain, pinion and crown do not present:

- Damaged rollers.

- Loose pins.

- Dry, rusty, flattened or jammed chain links.

- Excessive wear.

- Excessively worn or damaged pinion or crown teeth.

CAUTION

IF THE CHAIN ROLLERS ARE DAMAGED AND / OR THE PINS ARE LOOSE, THE ENTIRE CHAIN

UNIT (PINION, CROWN AND CHAIN) SHOULD BE REPLACED.

LUBRICATE THE CHAIN ON A REGULAR BASIS, PARTICULARLY IF YOU DETECT DRY OR

RUSTY PARTS.

FLATTENED OR JAMMED CHAIN LINKS SHOULD BE LUBRICATED AND GOOD OPERATING

CONDITIONS RESTORED.

Chassis RX SX 125

CHAS - 180

Questions and Answers:

Need help?

Do you have a question about the APRILIA SX 125 and is the answer not in the manual?

APRILIA SX 125 Specifications

General