Name: APRILIA SX 125
Brand: APRILIA
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Top-up

•

The following operations refer to one

braking system but they are valid for

both braking systems:

1. Front brake fluid reservoir (1);

2. Rear brake fluid reservoir (2).

CAUTION

RISK OF BRAKE FLUID SPILLS. DO NOT PULL THE

BRAKE LEVER WHEN THE COVER FIXING SCREWS ARE

LOOSE OR, MAINLY, WHEN THE BRAKE FLUID RESER-

VOIR COVER HAS BEEN REMOVED.

•

Undo and remove the two screws fixing the brake fluid reservoir cover.

CAUTION

AVOID PROLONGED AIR EXPOSURE OF THE BRAKE FLUID. BRAKE FLUID IS HYGROSCOPIC

AND ABSORBS MOISTURE WHEN IN CONTACT WITH AIR. LEAVE THE BRAKE FLUID RESER-

VOIR OPEN ONLY FOR THE TIME NEEDED TO COMPLETE THE TOPPING-UP PROCEDURE.

•

Depending on whether you are work-

ing on the front (1) or the rear (2) brake

reservoir, lift and remove the relevant

cover (3 or 5) and gasket (4 or 6).

TO AVOID SPILLING FLUID WHILE TOPPING-UP, KEEP

THE TANK PARALLEL TO THE RESERVOIR EDGE (IN

HORIZONTAL POSITION).

DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO

THE FLUID.

WHEN USING A FUNNEL OR ANY OTHER ELEMENT,

MAKE SURE IT IS PERFECTLY CLEAN.

Maintenance RX SX 125

MAIN - 30

Questions and Answers:

Need help?

Do you have a question about the APRILIA SX 125 and is the answer not in the manual?

APRILIA SX 125 Specifications

General