APRILIA SX 125 User Manual

•
Drain again all the oil inside the stem.
Disassembling the fork
CAUTION
THE FOLLOWING OPERATIONS REFER TO A SINGLE WHEEL HOLDER STEM / SLEEVE BUT
APPLY TO BOTH.
•
Screw the stem, on the foot side, with
a vice fitted with protection jaws to
avoid damaging it.
•
Loosen the fixing screw and remove
the guide of the stem cover.
•
Hold the sleeve and firmly slide it off the
stem.
•
Screw the sleeve in a vice fitted with
protection jaws so as to avoid dam-
ages.
•
With a plain slot screwdriver remove
the dust guard, being careful not to
damage the sleeve rim.
•
The dust guards removed can not be
reused.
Suspensions RX SX 125
SUSP - 150

APRILIA SX 125 Specifications

General

Displacement	124.2 cc
Cooling System	Liquid cooled
Fuel System	Electronic fuel injection
Transmission	6-speed
Rear Suspension	Monoshock
Front Tire	100/80-17
Rear Tire	130/70-17
Compression Ratio	12.5:1
Starter	Electric
Clutch	Wet multi-plate
Front Brake Disc	300 mm
Rear Brake Disc	220 mm
Dry Weight	134 kg
Bore x Stroke	58 mm x 47 mm
Max Power	11 kW (15 HP) @ 10, 000 rpm
Front Suspension	41 mm USD fork
Front Brake	Single 300 mm disc
Rear Brake	Single disc
Fuel Tank Capacity	7 liters
Frame	Steel perimeter
Engine Type	Single-cylinder, 4-stroke