Name: APRILIA SX 125
Brand: APRILIA
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vehicle preparation

CAUTION

BEFORE CARRYING OUT THE OPERATIONS BELOW, BEAR IN MIND THAT THE ENGINE MUST

BE REMOVED FROM THE CHASSIS TOWARDS THE BOTTOM; AFTERWARDS ARRANGE AND

POSITION THE NECESSARY TOOLS.

NOTE

GET A HOIST AND BELTS FOR LIFTING.

•

Position the vehicle on its OPTIONAL front service stand.

•

Support the vehicle rear part using a hoist, fastening two suitable belts to the rear frame.

•

Remove the central and front side fairings.

•

Remove the fuel tank.

•

Lift the hoist arm until the belts are linked to the chassis and are taut.

•

Remove the complete exhaust.

Removing the engine from the vehicle

•

Remove the battery (1) from its hous-

ing.

•

Before draining the cooling system,

prepare a container of suitable capaci-

ty.

•

Empty the cooling system by undoing

the front screw set to "OUT" on the left-

hand side of the crankcase.

•

Release the clamps and slide both

cooling system pipes off the engine.

Engine from vehicle RX SX 125

ENG VE - 70

Questions and Answers:

Need help?

Do you have a question about the APRILIA SX 125 and is the answer not in the manual?

APRILIA SX 125 Specifications

General