APRILIA SX 125 User Manual

•
Apply SILASTIC 732 RTV to the cable
guide of coil and stator, then slide it in
the crankcase hollow space.
•
Fit the electric starter device cover on
the starter gear.
Stator installation
•
Insert the woodruff key in the crank-
shaft.
•
Place the stator.
•
Tighten the three stator fixing screws.
Flywheel cover installation
•
Apply a thin layer of SILASTIC 732
RTV on the flywheel cover centring.
•
Place the flywheel cover.
Engine RX SX 125
ENG - 100

APRILIA SX 125 Specifications

General

Displacement	124.2 cc
Cooling System	Liquid cooled
Fuel System	Electronic fuel injection
Transmission	6-speed
Rear Suspension	Monoshock
Front Tire	100/80-17
Rear Tire	130/70-17
Compression Ratio	12.5:1
Starter	Electric
Clutch	Wet multi-plate
Front Brake Disc	300 mm
Rear Brake Disc	220 mm
Dry Weight	134 kg
Bore x Stroke	58 mm x 47 mm
Max Power	11 kW (15 HP) @ 10, 000 rpm
Front Suspension	41 mm USD fork
Front Brake	Single 300 mm disc
Rear Brake	Single disc
Fuel Tank Capacity	7 liters
Frame	Steel perimeter
Engine Type	Single-cylinder, 4-stroke