ACTA 4000 User Guide Maintenance
9836 4171 01 2008-12 133 (136)
11 Maintenance
11.1 Cleaning
Before cleaning your ACTA always shut it off and disconnect it from the external power supply.
The ACTA should be cleaned with a moist cloth. Use water and a light soap solution. Wipe dry. Do not
use any solutions containing oil and silicone or other solutions that are harmful to plastics.
11.2 Service & Calibration
The ACTA does not contain any serviceable items. Never attempt to open the unit. Atlas Copco
recommends that you calibrate your ACTA once a year. For calibration, please contact your Atlas Copco
service representative.
11.3 Software Upgrade
To upgrade the software in your ACTA, please contact your local Atlas Copco service representative.
To Next Page
Loading...
Need help?
General
