Version 6.6 135 MP-11x & MP-124
User's Manual 12. Security
Parameter Description
Match Count
[AccessList_MatchCount]
(Read-only) Displays the number of packets accepted or rejected by
the rule.
12.2 Configuring 802.1x Settings
The 802.1x Settings page is used to configure IEEE 802.1X LAN security. The device can
function as an IEEE 802.1X supplicant. IEEE 802.1X is a standard for port-level security on
secure Ethernet switches; when a device is connected to a secure port, no traffic is allowed
until the identity of the device is authenticated.
The device supports the following Extensible Authentication Protocol (EAP) variants:
Protected EAP (PEAPv0 with EAP-MSCHAPv2)
EAP-TLS
For a description of the parameters appearing on this page, see 'Configuration Parameters
Reference' on page 461. For more information on this feature, refer to the Product
Reference Manual.
To configure the 802.1x parameters:
1. Open the 802.1x Settings page (Configuration tab > VoIP menu > Security submenu
> 802.1x Settings).
Figure 12-2: 8021x Settings Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
To Next Page
Loading...
Need help?
General
