Version 6.6 321 MP-11x & MP-124
User's Manual 29. Basic Maintenance
29 Basic Maintenance
The Maintenance Actions page allows you to perform the following:
Reset the device - see 'Resetting the Device' on page 321
Lock and unlock the device - see 'Locking and Unlocking the Device' on page 323
Save configuration to the device's flash memory - see 'Saving Configuration' on page
324
To access the Maintenance Actions page, do one of the following:
On the toolbar, click the Device Actions button, and then from the drop-down menu,
choose Reset.
On the Navigation bar, click the Maintenance tab, and then in the Navigation tree,
select the Maintenance menu and choose Maintenance Actions.
Figure 29-1: Maintenance Actions Page
29.1 Resetting the Device
The Maintenance Actions page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:
Save the device's current configuration to the device's flash memory (non-volatile).
Perform a graceful shutdown, whereby device reset starts only after a user-defined
time (i.e., timeout) or after no more active traffic exists (the earliest thereof).
Notes:
• Throughout the Web interface, parameters displayed with a lightning
symbol are not applied on-the-fly and require that you reset the device for
them to take effect.
• When you modify parameters that require a device reset, once you click
the Submit button in the relevant page, the toolbar displays "Reset" (see
'Toolbar Description' on page 38) to indicate that a device reset is
required.
• After you reset the device, the Web GUI is displayed in Basic view (see
'Displaying Navigation Tree in Basic and Full View' on page 39).
To Next Page
Loading...
Need help?
General
