Brother MFC-8535DN Service Manual

5-3
Confidential
1.2 List of Maintenance Mode Functions
Function
code
Function Refer to:
01 Initialize EEPROM parameters 1.3.1
08 ADF performance test 1.3.2
09 Print quality test pattern 1.3.3
10 Set worker switches (WSW) 1.3.4
11 Print worker switch (WSW) setting data 1.3.4
12 Check LCD operation 1.3.5
13 Check control panel key operation 1.3.6
18 Save NetConfig data 1.3.7
25 Display software version 1.3.8
28 Change setting for OnePushDemo function 1.3.9
32 Check sensor operation 1.3.10
33 Display LAN connection status 1.3.11
43 Set PC print functions 1.3.12
45
Change USB No. return value / Adjust left-end print
position / Adjust upper-end print position / Set HEXDUMP
Mode
1.3.13
46
Adjust printable range for each speed level
(Full speed / Half speed for thick paper / Quiet Mode)
1.3.14
52 Set country / language 1.3.15
53
Transfer received fax data / log information
(fax models only)
1.3.16
54 Fine-tune scanning position 1.3.17
55 Acquire white level data and set CIS scan area 1.3.18
61 Adjust touch panel 1.3.19
67 Continuous print test 1.3.20
69 Print frame pattern (single-side printing) 1.3.21
70 Print frame pattern (duplex printing) 1.3.22
71 Print test pattern 1.3.23
74 Configure for country/region and model 1.3.24
77 Print maintenance information 1.3.25
78 Check main fan operation 1.3.26
79 Delete fax data 1.3.27
80 Display machine log information 1.3.28

Brother MFC-8535DN Specifications

General

Brand	Brother
Model	MFC-8535DN
Category	All in One Printer
Language	English