5-29
Confidential
1.3.15 Set country / language (function code: 52)
<Function>
This function is user accessible, and is used to customize the EEPROM according to the
language, function settings, and firmware switch settings.
<Operating Procedure>
(1) Press the [5], and then the [2] key in the initial state of user maintenance mode.
"Set Country" is displayed on the LCD.
(2) Select the country to be shipped, and then press the [SET] or [OK] key.
(3) Press the [Yes] key. The new setting is saved. Once the saving is completed, the
machine returns to the ready state.
Note:
• This is only valid for models with spec code (detail) described in "Setting by spec code
list".
To Next Page
Loading...
Need help?
General
